Mark your aircraft switches with custom labels, also known as bezel switch labels. For example: heat, pump, on, off, trim up, starter, elevator, rudder, aileron, or any other text.

• Permanently engraved text. Each label displays up to two lines of text.
• Thin 1/32" UV stabilized non-rusting acrylic plastic.
• For indoor or outdoor use.
• Withstands temperatures to 175 degrees F without deflection.
• Available in three sizes: small is .5"W x .25"H, medium is 1"W x .25"H, and large is 1.5"W x .5"H.
• Main image above shows large size; all 3 sizes are shown in the small image with GENERATOR (medium), MAG SWITCHES ON (large), and OFF 2 (small).
• 8 character per line limit for small, 18 characters for medium and large.
• 3M self adhesive back. Just clean surface, peel, and stick.
• Ten color combinations: sky blue with white characters; black with white characters; white with black characters; brushed gold with black characters; brushed stainless with black characters; evergreen with white characters; red with white characters; yellow with black characters; orange with white characters; and light green with white characters.
• NOTE ON COLOR: the brushed stainless and gold colors are beautiful and look like metal but they do reflect light and may not be the best for visibility.
• Each label is individually made to order.
• Comfort House J0521. Made in USA.

Also referred to as our aircraft instrument panel labels, avionics switch labels, and aircraft placards.

Thanks to Walter in Norfolk, VA, for sending in the photos shown of the labels installed in his aircraft. These were size small labels in black with white characters.