Custom Truck Dash Label
Truck dash labels with translucent letters are made especially for backlit applications. The ones shown on this page were initially made to go under the bezel on a Kenworth dash.
Note- labels can also be made non-transparent.
Image of yellow labels in Kenworth cab thanks to Jason in Georgia. He noted they are thicker than the original labels so the metal tabs could not be bent over the plastic housing to hold the labels in place. Instead he used gel super glue.
New, thinner .025" labels now available. Refer to Comfort House item # A140.
Just some of the labels we've made for clients lately:
AIR HEATER
BACKUP LIGHTS
BEACON LIGHTS
BUMPER LIFT
CAMERA UP/DOWN
CHICKEN LIGHTS
CRUISE CONTROL
DOME LIGHTS
DOOR LOCKS
DRIVE AXLES
DRIVE DUMP
DRIVING LIGHTS
EASTERN TIME
ENGINE FAN
ENGINE LIGHTS
FIFTH WHEEL
FRONT LOCKER
FRONT VIBES
FUEL HEATER
HEAT LIGHTS
HOPPER LIGHTS
JAKE BRAKE
LEFT DRIVE
LEFT FLOOD
LEFT MIRROR
LEFT STEER
LIGHT BLINKY
REAR VIBES
RIGHT DRIVE
RIGHT FLOOD
RIGHT STEER
RIGHT WINDOW
MIRROR HEATER
OVERSIZE LIGHTS
POWER INVERTER
POWER TAKE-OFF
REAR LOCKER
RIGHT MIRROR
SET RESUME
SIDE LIGHTS
STEER DUMP
TAIL LIGHTS
TRAILER AXLES
TRAILER HOTLINE
TRUCK CLEAR
WIPERS
WIPER HEATER
XM RADIO
- Permanently engraved text. Each label displays up to 2 lines of 8 characters each.
- Fabricated from 1/16" (.062) UV stabilized non-rusting acrylic plastic.
- For indoor or outdoor use.
- Withstands temperatures to 175 degrees F without deflection.
- Size .85"W x .32"H. Custom sizes are available.
- Words are made with a slight offset on both the right and left sides to be visible under the Kenworth dash switch housing.
- Optional 3M self adhesive back - when used we recommend you apply an additional clear adhesive glue to this item to secure in place.
- Choose black background or yellow background. Custom colors available.
- Each label is individually made to order.
- Comfort House J0636. Made in USA.
Note- labels can also be made non-transparent.
Image of yellow labels in Kenworth cab thanks to Jason in Georgia. He noted they are thicker than the original labels so the metal tabs could not be bent over the plastic housing to hold the labels in place. Instead he used gel super glue.
New, thinner .025" labels now available. Refer to Comfort House item # A140.
Just some of the labels we've made for clients lately:
AIR HEATER
BACKUP LIGHTS
BEACON LIGHTS
BUMPER LIFT
CAMERA UP/DOWN
CHICKEN LIGHTS
CRUISE CONTROL
DOME LIGHTS
DOOR LOCKS
DRIVE AXLES
DRIVE DUMP
DRIVING LIGHTS
EASTERN TIME
ENGINE FAN
ENGINE LIGHTS
FIFTH WHEEL
FRONT LOCKER
FRONT VIBES
FUEL HEATER
HEAT LIGHTS
HOPPER LIGHTS
JAKE BRAKE
LEFT DRIVE
LEFT FLOOD
LEFT MIRROR
LEFT STEER
LIGHT BLINKY
REAR VIBES
RIGHT DRIVE
RIGHT FLOOD
RIGHT STEER
RIGHT WINDOW
MIRROR HEATER
OVERSIZE LIGHTS
POWER INVERTER
POWER TAKE-OFF
REAR LOCKER
RIGHT MIRROR
SET RESUME
SIDE LIGHTS
STEER DUMP
TAIL LIGHTS
TRAILER AXLES
TRAILER HOTLINE
TRUCK CLEAR
WIPERS
WIPER HEATER
XM RADIO
Contact Us: Email customerservice@comforthouse.com or Text 973-242-8080.
Comfort House is a manufacturer and distributor of switch labels, plates, filler panels, signs, and address plaques. 2026 is our 35th year of business. Thank you for shopping with us and supporting small business!
Entire Site Contents © Copyright 1991-2026, Comfort House, All Rights Reserved.











Happy Customer ,