| Tweet | 
|
Wall Mount Garden Hose Holder - Round With Decorative Scroll
Wall Mount Garden Hose Holder - Round With Decorative Scroll
Round Hose Holder - This decorative round hose holder with elegant scrollwork gets your garden hose up off the ground.
Made of hand-cast aluminum and suitable for parallel mounting on an outdoor house or garage wall. Holds up to 100' of standard size garden hose.
Two weather-resistant finishes: french bronze and black.
Package contains the round hose holder, three machine screws, a T-plate, three support tubes, three spacers, and mounting instructions. (Note: You will need to supply your own mounting hardware. For best results on exterior siding, manufacturer recommends that you locate a stud, behind the wall surface and use a #14 x 3" wood screw or 1/4" x 3" lag bolt. For brick, masonry, or concrete walls, use a 1/4" masonry anchor or toggle bolt.)
Dimensions: 22" x 22" x 5.5"D.
Made of hand-cast aluminum and suitable for parallel mounting on an outdoor house or garage wall. Holds up to 100' of standard size garden hose.
Two weather-resistant finishes: french bronze and black.
Package contains the round hose holder, three machine screws, a T-plate, three support tubes, three spacers, and mounting instructions. (Note: You will need to supply your own mounting hardware. For best results on exterior siding, manufacturer recommends that you locate a stud, behind the wall surface and use a #14 x 3" wood screw or 1/4" x 3" lag bolt. For brick, masonry, or concrete walls, use a 1/4" masonry anchor or toggle bolt.)
Dimensions: 22" x 22" x 5.5"D.
Testimonials
Contact Us.
1-800-359-7701 Mon-Fri 9AM-4PM ET
Comfort House is a small independent retailer and manufacturer established in 1991.
There are many imitators of our name and original ideas but there is only one Comfort House.
Thank you for shopping with us and for shopping small!
Entire Site Contents © Copyright 1991-2020, Comfort House, All Rights Reserved.
 |  |  |  |  |  |