| Tweet | 
|
Radon gas detector
Radon gas detector
Radon Gas Detector - - Electronic Radon Gas Detector enables homeowners to monitor the radon level in their homes. Easy to read digital display.
SafetySiren™ Pro Series 3 samples the air continuously and updates the display every hour. Numeric LED display range of 0.1 to 999.9 shows the level of radon gas in Pico Curies per liter (pCi/L). Short-term reading displays the average radon levels over the past 7 days. Long-term reading displays the average radon levels since powered-up or the last reset with a maximum reading time of 5 years. Plug into any 110-volt wall socket.
Location Requirements: Radon detector should be placed in the lowest living area of the home in a location where it won't be disturbed. To ensure an accurate reading, place unit at least 3' from windows and doors, 1' from exterior walls, at least 20" above the floor, and at least 4" from any other object. Detector should not be located in a kitchen, laundry room, closet, or bathroom; near heating, ventilating, and air conditioning vents; near fans, fireplaces, direct sunlight, electrical equipment, or any item that might inhibit the flow of air through ventilation slots.
120 volts; 60 Hz; 65 watts; 10' power cord; ENTELA certified to selected UL & CSA standards. Exceeds EPA recommended accuracy performance criteria. Dimensions: 3.125"W x 2"D x 4.625"H. 1-year mfg. warranty. Made in USA.
Not for sale to residents of Iowa. Sorry, we cannot ship this item to an Iowa address.
Not currently available.
SafetySiren™ Pro Series 3 samples the air continuously and updates the display every hour. Numeric LED display range of 0.1 to 999.9 shows the level of radon gas in Pico Curies per liter (pCi/L). Short-term reading displays the average radon levels over the past 7 days. Long-term reading displays the average radon levels since powered-up or the last reset with a maximum reading time of 5 years. Plug into any 110-volt wall socket.
Location Requirements: Radon detector should be placed in the lowest living area of the home in a location where it won't be disturbed. To ensure an accurate reading, place unit at least 3' from windows and doors, 1' from exterior walls, at least 20" above the floor, and at least 4" from any other object. Detector should not be located in a kitchen, laundry room, closet, or bathroom; near heating, ventilating, and air conditioning vents; near fans, fireplaces, direct sunlight, electrical equipment, or any item that might inhibit the flow of air through ventilation slots.
120 volts; 60 Hz; 65 watts; 10' power cord; ENTELA certified to selected UL & CSA standards. Exceeds EPA recommended accuracy performance criteria. Dimensions: 3.125"W x 2"D x 4.625"H. 1-year mfg. warranty. Made in USA.
Not for sale to residents of Iowa. Sorry, we cannot ship this item to an Iowa address.
Not currently available.
Testimonials
Contact Us.
Comfort House is a small independent retailer and manufacturer established in 1991.
There are many imitators of our name and original ideas but there is only one Comfort House.
Thank you for shopping with us and for supporting small business!
Entire Site Contents © Copyright 1991-2021, Comfort House, All Rights Reserved.
 |  |  |  |  |  |