Rubber Threshold Ramp - Click to enlarge
Email to a friendRubber Threshold Ramp - Click to enlarge
 

EZ ACCESS rubber threshold ramp

Item #: 62210F
$101.00
Select model in dropdown box: 
Qty:

padpadpad
pad

EZ ACCESS rubber threshold ramp

EZ ACCESS THRW36 150-1 & THR 250-1 Rubber Threshold Ramp are designed for doorways and raised landings. Available in two heights: 1.5" and 2.5".

1.5" threshold ramp with beveled edges (THRW36 150-1) is shown in the main image. This ramp is 42" wide including bevel for a usable width of 36" and a maximum height of 1.5". Depth is 12". Weight capacity 850 pounds. For sliding glass doors, thresholds, and raised landings.

2.5" threshold ramp (THR 250-1) is 24"L x 48"W x 2.5"H and weighs approximately 40 pounds. Weight capacity: 850 pounds. Width is 48". For wider entrances, simply place two ramps side by side. Alternately, this ramp can easily be trimmed for lower heights and narrower widths to fit any entrance or threshold.

Ramp simply sits against the doorsill (inside or outside) to provide a smooth ground-to-sill transition. Rubber threshold is especially convenient for sliding glass doors because it does not interfere with the door track.

Made of 100 percent recycled tires, EZ ACCESS Rubber Threshold ramps are ADA approved, slip-resistant, and designed for years of continual use.

The Rubber Threshold ramp is ideal for indoor and outdoor use. And because the ramp is fully portable, it can be moved to another location if desired. 1-year mfg. warranty.

In addition, a pair of Rubber Risers (2.25" high; item 60978F sold separately at the bottom of this page) can be combined with the 2.5" threshold to create a maximum height of 4.75". Note: To achieve a functional height of 4.75", you need two (2) 2.5" threshold ramps and one pair of risers. Stack one 2.5" threshold on top of the risers for the height and then butt the second 2.5" threshold against the risers to create a continuous slope. This configuration is shown in the small images above.

RELATED PRODUCTS
Wheelchair
Cane with built in light


 
Rubber Threshold Ramp
Item #: 62210F
$101.00
Select model in dropdown box: 
Qty:


pad
EZ Access THR RISER 225-1 PR Rubber Riser PairpadPair of two Rubber Risers for use with THR 150 or THR 250. Each riser is 24"L x 24"W x 2.25"H (total width of pair is 48"); weighs approximately 23.5 pounds. Weight capacity: 850 pounds. For sliding glass doors, thresholds, and raised landings. Order item 60978F.
pad
60978FpadRegular price: $167.95padWeb special: $123.00pad
EZ Access:  Qty:




BBBOnLine Reliability Seal