HeatTrak heated walkway mat
| HeatTrak Heated Entrance / Walkway Mat generates enough heat to melt snow at the rate of 2" per hour. Built with non-slip, UV-protected rubber, this traction mat is designed to be left out for the entire winter.
Outdoor heated mat helps reduce the risk of slipping and falling as you enter and exit any home, office, or commercial building and on nearby walkways.
In addition, the chevron pattern provides extra traction.
Heating element is sandwiched between two protective surfaces of non-slip rubber. Plugs into any standard 120 volt outlet.
Durable, non-slip, UV-protected rubber mat is engineered to be left outdoors for the entire winter. Can be secured to the ground or porch surface via the designed-in grommet holes and screws appropriate for the surface.
Operating cost depends on the size of the mat. However, on average each HeatTrak mat costs approximately 15 cents/hour to operate. Mat should be turned on when snow begins to fall or until all snow is melted. When turned on, the traction mat maintains an average temperature of 35 degrees F above the ambient temperature.
Safety concerns: HeatTrak heated mats have two built-in safety mechanisms: an equipment leakage circuit interrupter (ELCI) below the plug that instantly shuts off all power to the mat if it detects a current leakage of more than 27mA (which would be caused by a tear or cut in the mat) and a ground shield between the heating element and the rubber if the ELCI should fail to detect a breach.
Each mat has a 6' power cord on the lower right corner of the mat (or upper left corner if you rotate the mat).
Available in sizes ranging from 24" x 5' to 36" x 10'.
All mats are 1/4" high. UL/CE/CSA approved. Made in USA. Color: black. 2-year mfg. warranty. Special order.
- HTM24-5 (24" x 5'); 120 volts; 301 watts; 2.5 amps; 20 pounds.
- HTM24-10 (24" x 10'); 120 volts; 635 watts; 5.3 amps; 39 pounds.
- HTM24-15 (24" x 15'); 120 volts; 969 watts; 8.1 amps; 59 pounds.
- HTM24-20 (24" x 20'); 120 volts; 1303 watts; 10.9 amps; 78 pounds.
- HTM36-5 (36" x 5'); 120 volts; 457 watts; 3.8 amps; 33 pounds.
- HTM36-10 (36" x 10'); 120 volts; 964 watts; 8.0 amps; 66 pounds.